Know Before You Decide

Solar Savings Calculator

Adjust your monthly bill, rooftop area, and location to instantly see your recommended system size, annual savings, payback period, and 25-year projection.

⚡ Interactive ROI Calculator

Enter your details — results update instantly

Based on South India (Telangana/AP) solar irradiance, TSSPDCL/APEPDCL tariff rates, and real project data from ARIA Green Energy installations.

Your Facility Details

Monthly Electricity Bill ₹3,00,000
₹50K₹20L
Available Rooftop Area 5,000 sq ft
500 sq ft1 lakh sq ft
Panel Efficiency Tier Bifacial (23%)
Standard (20%)Bifacial (23%)Premium (24%+)
Include Battery Storage (BESS)? No BESS
No BESS50 kWh200 kWh
Financial Incentives
⚠ This calculator provides indicative estimates only, based on South India averages. Actual savings depend on your tariff slab, roof orientation, shading, and consumption pattern. We will provide a precise proposal after a free site audit.

Your Estimated Results

Recommended System Size
—
Based on your bill and roof area
Estimated Annual Solar Generation
—
kWh per year
Estimated Annual Savings
—
At current DISCOM tariff
Estimated System Cost (Gross)
—
Before tax incentives
Net Cost After Incentives
—
Incentives applied
Payback — Gross / After Incentives
—
Years
25-Year Cumulative Net Savings
—
Net of system cost, assuming 5% annual tariff increase
Annual CO₂ Offset
—
Tonnes of CO₂ per year
Get a Precise Site-Specific Proposal →

Calculator Assumptions

Solar Irradiance

South India average: 5.2 kWh/m²/day. Based on MNRE solar radiation atlas for Hyderabad/Deccan region.

System Performance

Performance Ratio (PR) of 78% assumed. Degradation: 0.5%/year for bifacial mono-PERC panels.

Tariff Escalation

5% annual increase in DISCOM tariff assumed for 25-year savings projection — conservative vs historical 8% average.

System Cost

₹38–48 per watt all-inclusive (2026 market rate). BESS at ₹35–42 per kWh. Includes installation, commissioning, net metering.

CO₂ Emission Factor

0.82 kg CO₂ per kWh (CEA national grid emission factor, 2024). Used for carbon offset calculation.

Space per kW

Approximately 80–100 sq ft per kW for mono-PERC panels at 20–25° tilt. Shading and obstruction not accounted for.

Ready for a Precise, Site-Specific Proposal?

This calculator is indicative. Our engineers will give you exact numbers after a free on-site audit — with no obligation to proceed.